Motion Detection

prevnext
show me how it works

MOTION 

Motion Detection products available for OEM applications as well as finished products used in energy saving solution.



  • TMSM100-1500 Motion Detector

    • Best used for Office/School Conference Room, Toilet, Car Park, etc... it can save as much as 60%* or more electric bills.
    • Auto On (model: TMSM100-1500) is a microwave sensor that detects minute motion of human bodies and reflective objects.
    • It is operated by AC source and automatically on and off electric instruments including lamps. So it can drastically
      reduce the amount of electricity.
    • It can be applicable to all the lamps.
    • It can detect moving objects more than 20m and insensitive to dust, light, and ambient temperature etc.
    • The attached CDS detects environmental light not to turn on the lamps to reduce unnecessary lighting.
    • The electric instruments can be used in parallel connection if the overall power consumption of used electric instruments doesn’t exceed 1500W.
    • The case when the load power is more than 1500W, an external solid state relay should be used additionally to switching the devices.

    • It penetrates transparent to non-metallic material surface. Even in toilet behind the door to make sure the light is ON when people is inside

    • Unlimited coverage (e.g. in CarPark): The coverage can be widened unlimitedly by parallel connection of Auto On’s.

    * may varies depends on implementation

    Adjustable:

    • Coverage: The detection range can be adjusted according to the area of the application.
    • Dimmer: It can adjust the power output during idle time, unlike other products only switching ON or OFF
    • Idle time: adjustable on/off when motion is not detected from 1 sec to 30 min

    Disadvantages of the infrared (IR) based sensor that our Microwave based sensor overcomes:

    • The disadvantage of IR sensor is in its principle of operation. If an object that radiates heat approaches sensor that increases the temperature of atmosphere, the sensitivity of IR sensor will decreases drastically.

    • The sensitivity of IR sensor is degraded at summer time when the environment temperature becomes similar to that of human body.

    • The sensitivity of IR sensor is also degraded when a man moves very slowly and uses a blocker of theraml radiation, such as umbrella etc.

     


     












  • TMS100 Motion Sensor Core Module

    TMS100 is a X-band Doppler sensor transceiver module for motion detection. It consists of DR (dielectric resonator) oscillator, passive diode mixer and patch antennas to provide the most reliable solution in motion detection as the core OEM module.

    Typical Application 

    • Intrusion Alarms
    • Automatic Door openers 
    • Obstruction Warning Systems 
    • Non-Contact Measurement 
    • Microwave-PIR motion detector 
    • Speed Measurement 
    • Light dimming control

    Detail Specification:

         Size(LxWxH)
     45x40x10mm3
    Output Power (EIRP)
     Typical :15.5  dBm
    Power Supply
     Typical :5  V
    Current Consumption
     Min : 30, Max : 60  mA
    Settling time
     Max : 6  uSec
    Noise(3~80Hz)
     Max : 10  uVrms
    Received Signal
     Max : 20  mVp-p

    3dB Antenna Beam Width -Azimuth
     Typical :81  cel
    3dB Antenna Beam Width - Elevation
     Typical :36  cel
    Operating temp
     Min : -20, Max : 55  cel
    Storage temp
     Min : -30, Max : 70  cel
    Pulse Width
     Min : 5  uSec
    Duty Cycle
     Min : 1  %
    Average Current(@5% duty)
     Typical :2  mA
    Frequency(±12.5)
     Typical :10525  MHz

     

    Dimension Diagram:

Desktop View